Standard Horizon GX2400GPS, Руководство пользователя

Страница: 66 / 148

64
4. Press the [ SELECT ] soft key, then press the [ YES ]
soft key to transmit the position request DSC call.
5. When the transceiver receives the position from the
polled vessel it is shown on the radio display.
6. Press the [ QUIT ] soft key to return to radio operation.
NOTE
If the transceiver does not receive position data from the polled vessel, the
display will show as follows.
--.--.---- _
---.--.---- _
Position Request by Manually Entering an MMSI
This feature allows you to request the position of a vessel by manually enter -
ing the MMSI.
1.
[ ]

“ DSC CALL ”

“ POS REQUEST ”
2. Rotate the DIAL/ENT knob to select “ NEW ID ”, then
press the [ SELECT ] soft key.
3. Press the [◄] or [►] key to select the first number
of the MMSI (nine digits) which you want to contact,
then press the [ SELECT ] soft key to step to the next
number.
4. Repeat step 3 to set the MMSI number.
If a mistake is made entering in the MMSI number,
press the [◄] or [►] key to select “←” or “→”, press
the [ SELECT ] soft key until the incorrect character is
selected, then perform step 3.
5. When finished entering the MMSI number, press the
[ FINISH ] soft key.
6. Press the [ YES ] soft key to transmit the position
request DSC call.