Standard Horizon GX2400GPS, Руководство пользователя

Страница: 85 / 148

83
13 GM OPERATION
The GM (Group Monitor) feature of the GX2400 utilizes the same system as
the DSC Group call and Auto Position Polling, to display the group members'
locations.
13.1 SETTING UP GM OPERATION
The transceiver is capable of storing up to 10 groups with 1 to 9 members each.
13.1.1 Setting Up GM Group Directory
NOTE
• For this function to operate, the same group MMSI must be programmed
into the transceivers of all the group members to be monitored. Refer to
section “ 11.5.1 Setting up a Group Call ” for details.
• Group members for GM operation can only be selected from the Individual/
Position Call directory, therefore for all members that you want to monitor,
must be stored in the directory. Refer to section “ 11.4.1 Setting up the
Individual / Position Call Directory ” for details.
1.
Press & hold [
]

“ GM SETUP ”

“ GM GROUP DIRECTORY ”
2. Rotate the DIAL/ENT knob to select “ ADD ”, then
press the [ SELECT ] soft key.
3. Rotate the
DIAL/ENT
knob to select “
NAME:
”, then
press the [ SELECT ] soft key.
4. Enter the route name by rotating the DIAL/ENT knob
and the [
SELECT
] soft key.
When finished entering the name (using eleven char -
acters or less), press the [
FINISH
] soft key.
5. Rotate the
DIAL/ENT
knob to select “
GM ID:
”, press
the [ SELECT ] soft key, then enter the group MMSI
number.
When finished entering the MMSI, press the [ FINISH ]
soft key.
6. Rotate the
DIAL/ENT
knob to select “
MEMBER
”, then
press the [ SELECT ] soft key.