Standard Horizon GX2400GPS, Руководство пользователя

Страница: 39 / 148

37
9.11.3 Deletion
1. Press one of the soft keys.
2. Press the [◄] or [►] key repeatedly, then press the
[ P-SET ] soft key to recall the preset channel
3. Rotate the DIAL/ENT knob to select the preset chan -
nel to be deleted.
4. Press one of the soft keys, then press and hold the
[ PRESET ] soft key until the “ P-SET ” icon and channel
number are blinking.
5. Press the [ DELETE ] soft key to delete the channel
from the preset channel memory.
6. Repeat steps 3 through 5 to delete the undesired
channels from preset channels.
7. To exit from deleting the preset channels, press the [ QUIT ] soft key.
9.12 MOB OPERATION
The GX2400 provides a feature to memorize the position information instantly
in case of MOB (Man Over-Board).
1. Press one of the soft keys.
2. Press the [◄] or [►] key repeatedly, then press the
[ MOB ] soft key.
3. Press the [ TO WPT ] soft key to start the navigation to
the displayed position. For details about the naviga -
tion, see section “ 12 NAVIGATION ”.
To change the displayed position information, press the
[
POS/TM
] soft key. For details about modification of the
position, see “ Editing a Waypoint ” on page 78.
4. To transmit a DSC distress message, lift the red
spring loaded DISTRESS cover on the right side of
the transceiver, then press and hold the DISTRESS
key (see section “
11.2.1 Transmitting a Distress
Alert ” for details).