25
WARNING
The MMSI can be input only once, be careful not to input the incorrect
MMSI number.
If the MMSI number needs to be reset, contact Standard
Horizon to obtain the required reset code. Refer to section “
Programming the MMSI
1. Press the [
MENU/SET
] key to display “
MENU
”.
2. Rotate the
DIAL/ENT
knob to select “
MMSI/POS
INFO
”, then press the [
SELECT
] soft key. (To cancel,
press the [
BACK
] soft key.)
3. The “
MMSI INPUT
” screen is displayed if the MMSI
has not yet been input.
When the transceiver entry has been completed, it is
only possible to check the MMSI on this screen.
*********
4. Press the [◄] or [►] key to select the first number of
your MMSI, then press the [
SELECT
] soft key to step
to the next number.
5. Repeat step 4 to set your MMSI number (9 digits).
If a mistake is made entering in the MMSI number,
press the [◄] or [►] key to select “←” or “→”, press
the [
SELECT
] soft key until the incorrect character is
selected, then perform step 4.
6. When finished programming the MMSI number, press
the [
FINISH
] soft key. The radio will ask you to input
the MMSI number again. Perform steps 4 through 6
above.
*********
7. After the second number has been input, press the
[
FINISH
] soft key to store the MMSI.
8. Press the [
OK
] soft key to return to radio operation.
NOTE
To check the MMSI after programming to ensure it is correct, perform steps
1 to 2. The current MMSI number is shown on the display.
Содержание GX2400GPS
Страница 146: ......