Standard Horizon GX2400GPS, Руководство пользователя

Страница: 53 / 148

51
3. In the INTERSHIP CH list, rotate the DIAL/ENT knob
to select the operating channel on which you want to
communicate, then press the [ SELECT ] soft key. To
select operating channels from all voice channels,
press the [ MANUAL ] soft key.
4. Press the [ YES ] soft key to transmit the selected type
of all ships call.
5. After the all ships call is transmitted, the transceiver
will switch to the selected channel.
6. Listen to the channel to make sure it is not busy, then
key the microphone and say “PAN PAN, PAN PAN,
PAN PAN” or “Securite, Securite, Securite” depending
on the priority of the call.
7. Press the [ QUIT ] soft key to exit the all ships call
menu.
11.3.2 Receiving an All Ships Call
1. When an all ships call is received, an emergency
alarm will sound.
The display shows the MMSI of the vessel transmit -
ting the all ships call and the radio will change to
the requested channel after 30 seconds (the default
setting of “AUTO CHANNEL CHANGE”).
2. Press any key to stop the alarm.
3. Monitor the requested channel until the all ships voice
communication is completed.
On the display you will notice 3 soft key selections.
These selections are described below:
[
ACCEPT
]: Press this key to accept the DSC all ships
call and to switch to requested channel.
NOTE : If a key is not pressed for 30* seconds or longer the radio will automatically
change to the requested channel.
*(The default setting of “AUTO CHANNEL CHANGE”)
[ PAUSE ]: Press this key to temporarily pause automatic switching to the
requested channel.
NOTE : In some cases, automatically switching to the requested channel might disrupt
important ongoing communications. Commercial users may suspend channel switch -
ing and remain on the working channel in use before the all ships call was received.
[ QUIT ]: Press this key to quit the automatic channel switching and revert
to the last selected working channel.