Standard Horizon GX2400GPS, Руководство пользователя

Страница: 114 / 148

112
18.6 POSITION REPLY
The GX2400 can be set up to automatically (default setting) or manually send
your position when requested by another vessel. This selection is important if
you are concerned about someone polling the position of your vessel that you
may not want to. In the manual mode you will see the MMSI (Maritime Mobile
Service Identity Number) or persons name, shown on the display allowing you
to choose whether or not to send your position to the requesting vessel.
Refer to section “ 11.6.1 Setting up a Position Request Reply ” for details.
18.7 AUTO POSITION POLLING
The
GX2400
has the capability to automatically poll and track seven vessels
programmed into the individual directory.
Refer to section “
11.8 AUTO POSITION POLLING
” for details.
18.8 AUTO POSITION INTERVAL
The time interval between automatic position polling request transmissions
may be selected.
Refer to section “ 11.8.2 Setting up the Polling Time Interval ” for details.
18.9 AUTO CHANNEL CHANGE
When a DSC distress call, or an all ships (urgency or safety) call is received,
the
GX2400
will automatically switch to Channel 16.
The automatic switch time may be changed. The default selection is 30 seconds.
1.
Press & hold [
]

“ DSC SETUP ”

“ AUTO CHANNEL CHANGE ”
2. Rotate the DIAL/ENT knob to select the desired time,
then press the [ ENTER ] soft key.
3. Press the [ CLEAR ] key to return to radio operation.
When “
OFF
” is selected, the “ ” icon will light up on the
screen.