Standard Horizon GX2400GPS, Руководство пользователя

Страница: 71 / 148

69
11.7.4 Saving the Reported Position as a Waypoint
The transceiver can save a position report call in the radio’s memory as a
waypoint.
1. After the position report call has been received, press
the [ SAVE ] soft key.
2. If you want to change the name of the waypoint, rotate
the DIAL/ENT knob to select “ NAME ”, then press the
[ SELECT ] soft key.
3. Enter the name of the waypoint you want to reference
in the directory. For details, refer to “ 11.4.1 Setting
up the Individual / Position Call Directory
”.
4. Press the [ ENTER ] soft key to save the waypoint into
memory.
5. Press the [ OK ] soft key to return to the position report
display.
Navigating to a Saved Waypoint
Refer to section “ 12.1.1 Starting and Stopping Navigation ” for details.
11.7.5 Setting up a Position Report Ringer
The transceiver position report ringer may be turned OFF.
1.
Press & hold [
]

“
DSC SETUP
”

“
DSC BEEP
”
2. Rotate the DIAL/ENT knob to select “ POS REPORT ”,
then press the [ SELECT ] soft key.
3. Rotate the
DIAL/ENT
knob to select “
OFF
”.
4. Press the [
ENTER
] soft key to store the selected
setting.
5. Press the [ CLEAR ] key to return to radio operation.
To enable the ringer tone, repeat the above procedure, rotate the DIAL/ENT
knob to select “ ON ” in the step 3 above.