Standard Horizon GX2400GPS, Руководство пользователя

Страница: 67 / 148

65
7. When the transceiver receives the position from the
polled vessel it is shown on the radio display.
8. Press the [ QUIT ] soft key to return to radio operation.
NOTE
The received position from the polled vessel can be transferred to a GPS
chart plotter via NMEA DSC and DSE sentences.
11.6.3 Receiving a Position Request
1. When a position request call is received from another
vessel, a ringing sound will be produced, and the
display will be as shown in the illustration at the right.
2. Press any key to stop the alarm.
3. To send your vessel’s position to the requesting
vessel, press the [ REPLY ] soft key.
Or to exit from position request display, press the
[ QUIT ] soft key.
4. Press the [ QUIT ] soft key to return to the channel
display.
NOTE
When there is an unread position request call, the “ ” icon will appear on
the display. You may review the unread individual call from the DSC log, refer
to section “ 11.10.3 Reviewing Other Logged Calls ”.
11.6.4 Manual Input of Position Information
If the transceiver is located in an area where GPS reception is limited when
you are going to reply to the received position request, you may manually input
your location (latitude and longitude) and time to be sent.
1.
[ ]

“ MMSI/POS INFO ”
2. Press the [ POS/TM ] soft key.