100
9. Press the [
SELECT
] soft key to store the first letter in
the name and step to the next letter to the right.
10. Repeat steps 8 and 9 until the name is complete. The name can consist
of up to ten characters, and if you do not use all ten characters, select “→”
to move to the next space. This method can also be used to enter a blank
space in the name.
If a mistake was made entering in the station name, rotate the
DIAL/ENT
knob to select “←” or “→”, press the [
SELECT
] soft key until the wrong
character is selected, then perform steps 8 and 9.
11. When finished entering the station name (using ten characters or less),
press the [
FINISH
] soft key.
12. Press the
CLEAR
key to return to radio operation.
16.8 SOFT KEYS
From this menu, you can assign desired functions to each soft key from numbers
01 to 12. You can also set how long the soft key icon will be displayed after the
corresponding soft key is pressed.
16.8.1 Key Assignment
1.
Press & hold [
]
“
CONFIGURATION
”
“
SOFT KEY
”
2. Rotate the
DIAL/ENT
knob to select “
KEY ASSIGN-
MENT
”, then press the [
SELECT
] soft key.
3. Rotate the
DIAL/ENT
knob to select the key number
to be programmed, and press the [
SELECT
] soft key.
4. Rotate the
DIAL/ENT
knob to select a new function to
be assigned, and press the [
ENTER
] soft key. Avail
-
able functions are listed below. By selecting “NONE”
the soft key assignment is removed.
5. Repeat steps 3 and 4 to program other soft keys.
The VHF radio functions can be assigned to a maximum of 12 soft keys.
6. Press the [
CLEAR
] key to return to radio operation.
Содержание GX2400GPS
Страница 146: ......
