Standard Horizon GX2400GPS, Руководство пользователя

Страница: 105 / 148

103
16.9.1 Reset the USER MMSI and ATIS CODE
If the MMSI number and ATIS* code need to be reset. Please contact Standard
Horizon to obtain the required reset codes.
*(GX2400GPS/E only)
To request the Reset Code
Contact Standard Horizon and confirm the following required information.
●
The Information Necessary to obtain the Reset Code:
• Model name
• Serial number
• Current MMSI number and/or ATIS code
(To check the MMSI number and ATIS code, refer to “ 8.6.1 Maritime
Mobile Service Identity (MMSI) ” or “ 20 ATIS SETUP ”.
• Request codes for the MMSI number and/or the ATIS code
(See “ Checking the Request code ” below).
●
Contact Information
USA / Canada
E-mail: marinetech@yaesu.com
Telephone: (800) 767-2450
Europe
E-mail: service@yaesu.co.uk
Telephone: +44 (0)1962 866667
Checking the Request code
1.
Press & hold [
]

“ CONFIGURATION ”

“ RESET ”
2. Rotate the
DIAL/ENT
knob to select the desired
category. You can select either “ USER MMSI ”, or
“
ATIS CODE
”*, then press the [
SELECT
] soft key.
*(GX2400GPS/E only)
3. Press the [ SELECT ] soft key again.
The request code will be displayed.
NOTE
When resetting both “USER MMSI” and “ATIS CODE”, both request codes
are required.