Standard Horizon GX2400GPS, Руководство пользователя

Страница: 119 / 148

117
19.9 NMEA 0183 IN/OUT
19.9.1 Data Speed
This menu is utilized to set the NMEA 0183 baud rate of the GPS input (Yellow
and Green wires) and DSC output (White and Brown wires). The default setting
is 4800 bps.
When 38400 bps is selected the DSC sentences (DSC & DSE) are output on
the Blue and Gray wires after a DSC distress, position request is received.
1.
Press & hold [
]

“ GPS SETUP ”

“ NMEA 0183 IN/OUT ”
2. Rotate the DIAL/ENT knob to select “ DATA SPEED ”,
then press the [
SELECT
] soft key.
3. Rotate the DIAL/ENT knob to select the desired speed
from “ 4800bps ” and “ 38400bps ”.
4. Press the [ ENTER ] soft key to save the new setting.
5. Press the [ CLEAR ] key to return to radio operation.
19.9.2 Output Sentences
This selection is utilized to set the NMEA output sentences of the transceiver.
By default, the “GLL” and the “RMC” sentences are turned “ON”.
1.
Press & hold [
]

“ GPS SETUP ”

“ NMEA 0183 IN/OUT ”
2. Rotate the
DIAL/ENT
knob to select “
OUTPUT
SENTENCES ”, then press the [ SELECT ] soft key.
3. Rotate the DIAL/ENT knob to select the desired
sentence type, then press the [ SELECT ] soft key.
4. Rotate the DIAL/ENT knob to select “ ON ” or “ OFF ”.
5. Press the [ ENTER ] soft key to save the new setting.
6. Repeat steps 3 through 5 to set the other sentences.
7. Press the [ CLEAR ] key to return to radio operation.