Jensen VM8013HD Receiver Quick Start Guide
Need help?
For technical assistance,
call the Jensen customer
support line at
1-800-323-4815.
IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring
instructions carefully, or have the installation handled by an experienced technician.
(Yellow)
(Yellow)
(Blue)
(Yellow)
Purple
Purple/Black
Stripe
Gray/Black
Stripe
White/Black
Stripe
White
Green/Black
Green
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Rear)
Blue
Red
Front Line Out
R (Red)
L (White)
Black
Power Antenna
Connect to power antenna or amplifier.
If not used, tape bare end of wire.
Accessory/Ignition
Connect to existing radio wire
or radio fuse.
Rear Line Out
R (Red)
L (White)
Gray
Yellow
Black
Subwoofer Out
Parking/Active Low Level Input
(Pink)
Camera In
SAT R (Red)
Video Out 1
SAT L (White)
Video Out 2
Fuse (15A)
Camera/Active High Level Input (Green/White)
SWC (Steering Wheel Control)
Chassis Ground
Battery
)
-
(
)
(+
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
Connect the yellow wire to the battery
or 12 volt power source that is always
live.
This wire MUST be connected
for the radio to work.
IMPORTANT!
The pink parking
wire MUST be
connected to the
switched side of
the parking break
circuit (the part that
becomes grounded
when the brake is
applied).
Antenna
(Requires PAC SWI-PS Interface Adapter)
+
SAT BUS
IP
O
D
B
U
S
iPod
(Sold Separately)
jL
in
k
/j
L
in
k
iP
o
d
C
a
b
le
(I
n
c
lu
d
e
d
)
FILTER
BOX
Gray
Stripe
FRONT
REAR
External Power Amplifier
Printed in China
Satellite Radio Tuner
(sold separately)
2
