SRS Labs QMS 100 Series, Руководство пользователя

Страница: 48 / 280

2-18 General Utilities
SRS QMS Gas Analyzer
In PvsT mode, the cursor values are displayed in the legend box. If the legend view is toggled off
you cannot see the cursor values. This off-option can be useful if the legend box obscures some
data points. You may move the cursor by either clicking on or near a data point of interest, or by
clicking and dragging with the mouse with the left mouse button held down. You also can move
the cursor incrementally by using the
LEFT or RIGHT arrow keys.
In split mode, the cursor appears in both displays. You can move the cursor incrementally in the
top display by using the
LEFT or RIGHT arrow keys and in the bottom display by holding the
SHIFT key down while using the LEFT or RIGHT arrow keys.
Scheduled Saving of Data
Logging Scans
Scan logging options are available for all scan modes. Scan logging is enabled by default. The
logging settings are saved when a user exits the program.
To log scans to disk do the following:
1. Establish a connection between the RGA program and a Head.
2. Select a scan mode.
3. Customize the logging by selecting the “Scan Logging” command from the
File menu or by clicking the “logging Folder” button in the toolbar. The
logging directory must be selected for every scan mode or you can use default
values assigned by the installation program. The log file name is created
automatically. This saves valuable time for a user who always uses scan
logging. If you don’t want to keep unnecessary data on your hard drive, you
can periodically clean up the log dirs. You can select two different formats for
the log file name. The first format file name is created by the concatenation of
the title of the current document and the file timestamp. The second format
file name is created by the concatenation of a user defined name and the file
timestamp. The settings are stored, even if a user quits the program. More
details can be found in the help menu.
4. Start a scan.
To disable scan logging, use the scan logging dialog box again.
Viewing Scans
To view a scan log, the active RGA display mode must be the same type of display mode that
was used to log that scan.
To view the stored scans on disk do the following:
1. Select the Open Scan Logs from the File menu.
2. Select the desired scan log file ( it must be the same type of scan as the
currently active one).