Sony PCM-D10 Скачать руководство пользователя страница 54

Страница: 54 / 68

PCM-D10

Sony CONFIDENTIAL

For Authorized Servicer

4-9. Log

The simple service log can be outputted.
(The used time, the charging time, the number of times of pressed
the buttons, etc.)

Procedure:

1. Enter the test mode.

(Refer to “1. SETTING THE TEST MODE” on page 51)

2. Press the [

DPC]/[ A-B

] buttons to select the “Log”.

Version
Contrast Setting
LCD LED Light
Sleep
OFF DeepSleep
Power Down
Key Count
HotPlug Count

Log

Test mode menu screen

3. Press the [

] button to display the Log output screen.

WRITE :
Play
CLEAR :
VOL+ [0/5]
EXPORT :
Option

Screen display

4. Press the [

] button to complete the log writing, “Success” is

displayed.

WRITE :
Success
CLEAR :
VOL+ [0/5]
EXPORT :
Option

Screen display

– Continued to upper right –

5. With connecting the this unit to the PC, press the [OPTION]

button to output to the log

le on the root of this unit.

Note 1:

Number of log

le name is the date that has been set on this unit.

Note 2:

By releasing the test mode, and be connected this unit to the PC in

the normal mode, can not see the log

le.

To USB port

USB
Type-C port

USB Type-C cable

PC screen (root of this unit)

log file

[OPTION] button

6. Press the [OPTION] button again to release the connection of

this unit and the PC.

7. Press the [ BACK/ HOME] button, return to test mode menu

screen.

4-10. Erase

IPL2

Note:

This mode do not execute absolutely in the service.

When execute this mode,

rmware is destroyed.

4-11. Initialize

Menu

Note:

Not used for the servicing.

SYS SET

2019/03/08 01:38:10 (GMT+09:00)

Содержание PCM-D10





































































Результаты поиска

Содержание PCM-D10

Отзывы:

Sony PCM-D10, Руководство по обслуживанию, Страница: 54 / 68

Результаты поиска

Содержание PCM-D10

Отзывы: