PCM-D10
52
Sony CONFIDENTIAL
For Authorized Servicer
3. CONFIGURATION OF THE TEST MODE
Item selection
using [
v
DPC]
button
Item selection
using [ A-B
V
]
button
J
j
k
K
Execute the “Factory Shipment”
End of the test mode
Determine
using
[
N
] button
Move to the screen
of each item
Return the test
mode mebu using
[
BACK/ HOME]
button
Version
Contrast Setting
LCD LED Light
Sleep
OFF DeepSleep
Power Down
Key Count
HotPlug Count
Log
Erase IPL2
Initialize Menu
Factory Shipment
Key Check
Mic Check
BT
NFC
Audio Loop
Sine Wave
INT Mic Check
Setting Dest
Debug Mode
Chg Info
To Normal Mode
Turn on the [POWER] switch
Press the [
x
STOP] button (stop state)
7XUQRQWKH>+2/'@VZLWFKĺ>70$5.@ĺ
>70$5.@ĺ>$%
V
@ĺ>92/±@ĺ
[
v
'3&@ĺ>
v
'3&@ĺ>237,21@ĺ
>237,21@ĺ>
.
@ĺ>
.
]
Entering the test mode
(Test menu screen)
Turn off the [HOLD] switch,
and release the hold
4. OPERATION OF THE TEST MODE
4-1. Version
Model name, destination,
fi
rmware version, eMMC NAND capacity
and iSerial (unique ID) can be checked.
Procedure:
1. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 51)
2. Press the [
v
DPC]/[ A-B
V
] buttons to select the “Version”.
Version
Contrast Setting
LCD LED Light
Sleep
OFF DeepSleep
Power Down
Key Count
HotPlug Count
Log
Test mode menu screen
3. Press the [
N
] button to display the each check screen.
(Displayed characters/values in the following
fi
gure are exam-
ple)
NAME :
PCM-D10
DEST : E
FW : 1.00.00
NAND : 16 GB
iSerial :
180E7370400166
Screen display
Model name
Destination
Firmware version
eMMC NAND capacity
iSerial (unique ID)
Destination:
UC : US and Canadian models
E
: E model
CN : Chinese model
4. Press the [ BACK/ HOME] button, return to test mode menu
screen.
Ver. 1.1
SYS SET
2019/03/08 01:38:10 (GMT+09:00)