Sony PCM-D10 Скачать руководство пользователя страница 53

Страница: 53 / 68

PCM-D10

Sony CONFIDENTIAL

For Authorized Servicer

4-2. Contrast Setting

The LCD contrast can be set.

Procedure:

1. Enter the test mode.

(Refer to “1. SETTING THE TEST MODE” on page 51)

2. Press the [

DPC]/[ A-B

] buttons to select the “Contrast

Setting”.

Version

Contrast Setting

LCD LED Light
Sleep
OFF DeepSleep
Power Down
Key Count
HotPlug Count
Log

Test mode menu screen

3. Press the [

] button to display the LCD contrast setting screen.

(Displayed values in the following

gure are example)

NAME :

SAVE : Play

Screen display

Current contrast value

Button input settings under this mode of operation:

[

] : Contrast value down

[

] : Contrast value up

[

] : The current contrast value is set (saved)

4. Press the [

] button to complete the contrast value setting,

“Success” is displayed.

NAME :

Success

SAVE : Play

Screen display

5. Press the [ BACK/ HOME] button, return to test mode menu

screen.

4-3. LCD LED Light

The lighting state of the LCD and the each indicator can be checked.

Procedure:

1. Enter the test mode.

(Refer to “1. SETTING THE TEST MODE” on page 51)

2. Press the [

DPC]/[ A-B

] buttons to select the “LCD LED

Light”.

Version
Contrast Setting

LCD LED Light

Sleep
OFF DeepSleep
Power Down
Key Count
HotPlug Count
Log

Test mode menu screen

3. Press the [

] button to display the LCD and each indicator

lighting check screen.

(It turns into the white screen with all segments and lamps

turned off)

[

REC

PAUSE]
indicator

[

REC]

indicator

Peak level
indicators

All segments
off

Screen display

All segments
on

Display
pattern 1

Display
pattern 2

Button input settings under this mode of operation:

[

]/[

] : Screen display pattern change

[

STOP] : [

REC] indicator on/off change

[

REC]

: Peak level indicators and [

REC PAUSE] indi-

cator on/off change

4. Press the [ BACK/ HOME] button, return to test mode menu

screen.

4-4. Sleep

Note:

Not used for the servicing.

4-5. OFF DeepSleep

Note:

Not used for the servicing.

4-6. Power Down

Note:

Not used for the servicing.

4-7. Key Count

Note:

Not used for the servicing.

If you accidentally executed this mode and entered it, return to the test

mode menu screen by removing the batteries, inserting them again
and turning the power on.

Even if you removed the batteries, test mode is not released.

4-8. HotPlug Count

Note:

Not used for the servicing.

SYS SET

2019/03/08 01:38:10 (GMT+09:00)

Содержание PCM-D10





































































Результаты поиска

Содержание PCM-D10

Отзывы:

Sony PCM-D10, Руководство по обслуживанию, Страница: 53 / 68

Результаты поиска

Содержание PCM-D10

Отзывы: