PCM-D10
19
Sony CONFIDENTIAL
For Authorized Servicer
LINE OUT JACK CHECKING METHOD
When the following target part replaced with new part, follow the
procedure in this section to check the LINE OUT jack.
Target part:
Complete MAIN board
Complete HP_LINE_JACK board
Beforehand preparation:
Prepare the following equipment etc.
• AV
ampli
fi
er or playback device (analog)/speaker (commercial
products)
• Audio cable (commercial products)
• Size AA batteries (4)
Open the battery lid on the rear side of main unit, install the four
size AA batteries.
LINE OUT jack checking procedure:
1. Turn the power on by turning ON of the [POWER] switch on the
left side of main unit.
2. Connect the audio cable to the AV ampli
fi
er or playback equip-
ment (analog) that you prepared in advance and connect it to the
LINE OUT jack of this unit.
Audio cable of
commercial products
AV amplifier
or playback
device (analog)
Speaker
Speaker
To LINE OUT
jack
To audio input
terminal
3. Press
the
[ BACK/ HOME] button for about 1 second or longer
to display the home menu.
HOME
Record
Recorded Files
Music
Bluetooth
Settings
>%$&.+20(@EXWWRQ
4. With “Record” selected, press the [
N
] button to decision.
HOME
Record
Recorded Files
Music
Bluetooth
Settings
[
N
] button
5. In the state of step 4 (recording standby), press the [OPTION]
button to open the option menu.
REC Information
Recording Folder
Create Folder
Rec Mode
Stereo/Monaural
Peak Hold
LCF(Low Cut)
[OPTION] button
6. Press the [
v
DPC]/[ A-B
V
] buttons to select the “Recording
Folder” in the option menu and press the [
N
] button to deci-
sion.
REC Information
Recording Folder
Create Folder
Rec Mode
Stereo/Monaural
Peak Hold
LCF(Low Cut)
7. Select the memory (Built-In Memory or SD Card) and folder
you want to save the recording.
(The
fi
gure below is a reference example)
SD Card
Built-In Memory
Memory Selection
Built-In Memory
FOLDER02
FOLDER01
– Continued on next page –
SYS SET
2019/03/08 01:38:10 (GMT+09:00)