
PCM-D10
25
Sony CONFIDENTIAL
For Authorized Servicer
Note:
Follow the disassembly procedure in the numerical order given.
2-2. REAR GUARD (MIC)
front side
top side
bottom side
foot mounting
hole
foot mounting
hole
+RZWRLQVWDOOWKHIRRW
)LJ$!
When installing the foot, align the rib
of foot and groove of foot mounting
hole.
groove
rib
foot
Press.
1
foot
(See
Fig.
A)
4
two screws
(Z1.7
u
4.5)
1
foot
(See
Fig.
A)
2
screw
(M2
u
6)
2
screw
(M2
u
6)
5
rear guard
(MIC)
3
label (model number)
(See Fig. B)
Note
1:
If the label (model number) cannot be reused
because it is damaged or bent, make sure to
replace it with a new one.
rib
foot
Press.
groove
)LJ%!
$IIL[LQJWKHODEHOPRGHOQXPEHU
guide line
label (model
number)
NG
foot mounting
hole (See Fig. A)
Check that there is
no debris or dirt in
the affixing area of
the label (model
number).
Affix the label (model number)
so that it follows the guide line
and is neatly within the affixing
area.
There are bumps in the
label (model number).
Note 2:
The figure above
is an example.
2-3. ORNAMENT
(XLR)
front side
top side
bottom side
1
two screws
(Z1.7
u
4.5)
1
two screws
(Z1.7
u
4.5)
2
ornament (XLR)
SYS SET
2019/03/08 01:38:10 (GMT+09:00)