
PCM-D10
14
Sony CONFIDENTIAL
For Authorized Servicer
NFC CONNECTION CHECKING METHOD
When the replaced parts of this unit, check the connection of NFC
after completion of repair.
Beforehand preparation:
Prepare the following equipment etc.
• Bluetooth audio device with NFC function
• Size AA batteries (4)
Open the battery lid on the rear side of main unit, install the four
size AA batteries.
NFC connection checking procedure:
1. Turn on the NFC function of Bluetooth audio device.
2. Turn the power on by turning ON of the [POWER] switch on the
left side of main unit.
3. Touch the N mark part of this unit to the N mark part of the
Bluetooth audio device.
Note 1:
Continue to touch the N mark until instructed appear on screen of
this unit.
4. If the NFC connection is normal, the screen shown in the
fi
gure
below is displayed on the this unit.
Press the [
.
]/[
>
] buttons to select the “Yes” and press the
[
N
] button to connecting.
Note 2:
If there is a problem with NFC connection, the screen shown in the
fi
gure below will not be displayed. Refer to “What to do if you can
not NFC connect” on the right and check NFC connection again.
Add device (pairing).
Do you want to
continue?
Yes
No
5. Touch the N mark part of this unit to the N mark part of the
Bluetooth audio device and release the NFC connection.
6. After checking is completed, refer to “INITIALIZATION
METHOD” on page 22 and delete the NFC connection history.
What to do if you can not NFC connect:
If can not connect, please corrective action below.
• Press the [ BACK/ HOME] button for about 1 second or longer
to display the home menu, select the “Bluetooth”
t
“NFC set-
tings”, and check that “ON” is checked.
(NFC function does not work if there is no checked to “ON”)
ON
OFF
NFC Settings
HOME
Record
Recorded Files
Music
Bluetooth
Settings
Bluetooth ON/OFF
Audio Device
REC Remote
NFC Settings
Bluetooth Information
Auto Standby Message
Bluetooth
Advanced
• Press the [ BACK/ HOME] button for about 1 second or lon-
ger to display the home menu, select the “Bluetooth”
t
“NFC
settings”
t
“Advanced” and check that “Auto(Preferred)” is
selected.
(If you select either “Audio Device Only” or “REC Remote
Only”, NFC connection can not be made with the equipment of
the unselected item)
ON
OFF
Advanced
NFC Settings
Audio Device Only
Auto(Preferred)
REC Remote Only
Advanced
HOME
Record
Recorded Files
Music
Bluetooth
Settings
Bluetooth ON/OFF
Audio Device
REC Remote
NFC Settings
Bluetooth Information
Auto Standby Message
Bluetooth
• NFC connection can not be made during recording operation
(during recording, recording pause, recording standby). Please
make a connection after stopping recording.
SYS SET
2019/03/08 01:38:10 (GMT+09:00)