manualshive.com logo in svg

Sony PCM-D10, Руководство по обслуживанию, Страница: 20 / 68

Поделиться
Скачать
Sony PCM-D10 Скачать руководство пользователя страница 20

PCM-D10

20

Sony CONFIDENTIAL

For Authorized Servicer

8.  Press the [

z

 REC] button on the front of the main unit, the unit 

enters the recording paused state, and the [

zX

] and the elapsed 

time on the display window blink.

[

z

 REC] button

9.  Turn the [REC LEVEL] dial back and forth, and adjust the re-

cording level while watching the peak level meters on the dis-
play window.

Note 1:

 The recording level is displayed on the peak level meter during 

recording. The recording level can be con

fi

 rmed by both the peak 

level meter of the display window and the peak level indicators. 
Adjust the recording level within the appropriate range that match-
es the sound source with -12 dB as a rough estimate.

[REC LEVEL]
dial

Peak level meters

Peak level indicators

10.  Press the [

X

 REC PAUSE] button or the [

N

] button on the front 

of the main unit to start recording.

 

(“REC” light up in the display window during recording)

[

X

 REC PAUSE] button

[

N

] button

11.  Check that the sound being recorded is output from the speaker.

Note 2: 

If sound is not output correctly from the speaker, check the sol-
dering condition of the 

fl

 at cable HP (4P) connecting the MAIN 

board and the HP_LINE_JACK board. Please re-solder if there 
is a problem. Also, if not improving, replace the MAIN board 
and the HP_LINE_JACK board with new parts respectively.

12. Press the [

x

 STOP] button on the front of the main unit to end 

recording.

[

x

 STOP] button

13. Disconnect the AV ampli

fi

 er or playback device (analog) con-

nected to this unit.

Audio cable

14. Press the [ BACK/ HOME] button for about 1 second or longer 

to display the home menu.

HOME

Record

Recorded Files
Music
Bluetooth
Settings

>‡%$&.+20(@EXWWRQ

15. Press the [

v

 DPC]/[ A-B 

V

] buttons to select the “Recorded 

Files” and press the [

N

] button to decision.

HOME

Record

Recorded Files

Music
Bluetooth
Settings

Latest Recording

Search by REC Date
Folders

Recorded Files

[

N

] button

[

v

 DPC] 

button

[    A-B 

V

] 

button

16. With “Latest Recording” selected, press the [

N

] button to deci-

sion.

Note 3:

 After decision by pressing the [

N

] button, playback of the latest 

recorded 

fi

 le will start automatically.

Latest Recording

Search by REC Date
Folders

Recorded Files

[

N

] button

– Continued on next page –

SYS SET

2019/03/08 01:38:10 (GMT+09:00)

Содержание PCM-D10





































































Отзывы:

Нет отзывов