Sony FD Mavica MVC-FD97, Руководство по обслуживанию

Страница: 28 / 144

1-21
83
A
d
d
ition
al
in
fo
rm
atio
n
5
Open “Device Manager” on Windows.
6
After the message appears to verify that you delete the device
manager, click the [OK] button.
7
Turn off the camera, disconnect the USB cable, and restart the
computer.
8
Install the USB driver in the supplied CD-ROM to the computer
following the procedure on page 31. Perform all steps without
skipping.
Battery packs
Symptom Cause and/or Solution
The battery pack cannot
be charged.
•
The power of the camera is turned on.
t
Turn off the power of the camera (page 10).
The battery life is short. • You are recording/playing back images under
extremely cold temperatures.
• The battery pack is not charged enough.
t
Charge the battery pack fully.
•
The battery pack is dead.
t
Replace the battery pack with a new one.
For Windows 98, Windows 98SE and Windows Me users:
For Windows 2000 Professional users:
*
Log in with the permission of administrator.
1 Open [Control Panel] from [ My Computer], then double-click [System].
2 System properties is displayed. Click the [Device Manager] tab located at the
top.
3 Click [ SonyDSC] in [ Other devices], then click the [Delete (E)]
button located at the lower-right corner.
1 Open [Control Panel] from [ My Computer], then double-click [System].
2 System properties is displayed. Click the [Hardware] tab located at the top,
then click the [Device Manager (D)] button.
3 Click [View] in [Device Manager], then click [Devices by type (E)].
4 Right-click [ SonyDSC] in [ Other devices], then click [Delete (E)].
84
The indication of the
battery remaining time is
not proper, or the power is
immediately turned off
even if the battery
remaining indicator
indicates that the battery
level is sufficient.
•
You are using the camera for many hours under
extremely hot or cold temperatures.
• The battery pack is dead.
t
Replace the battery pack with a new one
(page 9).
• The battery level is too low.
t
Install the fully charged battery pack (page 9,
10).
• A deviation has occurred in the remaining battery
time.
t
Charge the battery pack fully (page 10).
The POWER ON/OFF
(CHG) lamp flashes when
charging a battery pack. • A malfunction has occurred in the battery pack.
t
Contact your Sony dealer or local authorized
Sony service facility.
The POWER ON/OFF
(CHG) lamp does not light
up when charging a
battery pack. • The AC power adaptor is not connected.
t
Connect the power cord firmly to a wall outlet
(mains) (page 10).
• The battery pack is not installed properly.
t
Install it properly (page 9).
• Charging of the battery pack is complete.
Symptom Cause and/or Solution
85
A
d
d
ition
al
in
fo
rm
atio
n
Warning and notice messages
Various messages appear on the LCD screen or on the finder. Check the
corresponding descriptions in the following list.
Message Meaning
DRIVE ERROR There is trouble with the disk drive.
SYSTEM ERROR Turn the power off and on again.
NO DISK No disk is inserted.
NO MEMORY STICK No “Memory Stick” is inserted.
FORMAT ERROR • The floppy disk loaded is not MS-DOS
formatted (512 bytes
× 18 sectors).
• Failed to format the “Memory Stick.”
• The Floppy Disk Adaptor for Memory
Stick is inserted.
MEMORY STICK ERROR The inserted “Memory Stick” cannot be
used with your camera, or the “Memory
Stick” is damaged or not inserted
correctly.
DISK PROTECT The tab on the disk is set to the
unrecordable position.
MEMORY STICK LOCKED The write-protect switch on the
“Memory Stick” is set to the LOCK
position.
DISK FULL The disk is full.
NO MEMORY SPACE The capacity of the “Memory Stick” is
not sufficient to record images.
NO FILE No image is recorded on the disk.
FILE ERROR Trouble has occurred during playback.
FILE PROTECT The image is protected.
DISK ERROR A 2DD floppy disk is inserted, or there is
trouble with the disk.
DIRECTORY ERROR A directory with the same name already
exists.
NOT ENOUGH MEMORY The remaining capacity of the floppy
disk or “Memory Stick” is not enough to
copy the image.
IMAGE SIZE OVER You tried to play back images with an
image size larger than the maximum
playback size of this camera.
86
INVALID OPERATION You are playing back a file that was
created on equipment other than your
camera.
for “InfoLITHIUM” battery only The battery is not the “InfoLITHIUM” type.
-
The image is protected.
The battery level is too low. When the
remaining time is about 5 to 10 minutes,
E
may flash depending on the battery
pack used, operating conditions, or the
environment.
Message Meaning