Sony FD Mavica MVC-FD97, Руководство по обслуживанию

Страница: 99 / 144

5-31
17. Strobe Light Level and White Balance Check
Check the light level regulation and the white balance when the
strobe light flashed.
Mode CAMERA
Subject Flash adjustment box (Note 3)
(1.0 m from the front of lens)
Measurement Point Displayed data of page: 1
Measuring Instrument Adjusting remote commander
Specified value Y level data: 60 to 94
R-Y level data: FA to FF or 00 to 06
(Note 4)
B-Y level data: FA to FF or 00 to 06
(Note 4)
Note 1: Perform “Hall Adjustment”, “Flange Back Adjustment”,
“Light Level Adjustment” and “Auto White Balance Ad-
justment” before this checking.
Perform this checking successively after performing
“Strobe White Balance Adjustment”. (Do not turn the
power of the unit OFF)
Note 2:
Perform this adjustment in the flash adjustment box.
Note 3: Refer to “4. Preparing the Flash Adjustment Box”.
(See page 5-7)
Note 4:
The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX

B-Y level data

R-Y level data
Note 5:
Displayed data of page: F, address: 64 of the adjusting
remote commander.
F:XX:64

Y level data
Note 6:
Check that the data of page: 6, address: 02 is “00”.
Checking method:
Order Page Address Data Procedure
1 6 01 79 Press PAUSE button.
2 6 01 67 Press PAUSE button.
3 Check the flashing of strobe
light.
4 6 02 Check the data changes to “01”.
5 F 64
Check that the data satisfies
the Y level data satisfied
value. (Note 5)
6 0 03 02
7 1
Check the R-Y and B-Y level
data (Note 4) satisfies the
specified value.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 0 03 00
2 6 01 00 Press PAUSE button.
3 6 2C 00
4 6 6C 00
5 6 93 00
6 5 F1 00
7 D 63 00 Press PAUSE button.
8
Release the data setting
performed at step 4 of
“Strobe White Balance
Adjustment”.
(Refer to page 5-14)
9 0 01 00