Sony FD Mavica MVC-FD97, Руководство по обслуживанию

Страница: 122 / 144

5-54
5-54 E
5. Switch Check (3)
Page 2 Address 54 to 59
Using method:
1) Select page: 2, addresses: 54 to 59.
2) By discriminating the dispaly data, the pressed key can be
discriminated.
7. Self Diagnosis Code
6. LED Check
Using method:
1) Select page: 2, address: 06, and set data: 02.
2) Check that all LED except for the ACCESS LED are lit.
3) Select page: 2, address: 06, and set data: 00.
Page 2 Address 06 Data 02
Note :
The error code is cleared if the battery is removed, except defective flash, unit.
*1: When the flash charging failed, Page: D, Address: 67, Data: 04 are written.
After repair, be sure to write Page: D, Address: 67, Data: 00.
[Power supplying Method]
Use the AC power adaptor (AC-L10A) when supplying the power to this set.
Address
Data
00 to 12 13 to 3A 3B to 62 63 to 87 88 to B3 B4 to D5 D6 to FF
54 MACRO FOCUS
(KEY AD0) (CF-83 board) (CF-83 board)
(IC404
uk
) (S401) (S402)
55 CONTROL DOWN CONTROL UP DISPLAY VOLUME– LCD ON/OFF
(KEY AD1) (PK-55 board) (PK-55 board) (PK-55 board) (PK-55 board) (PK-55 board) (PK-55 board)
(IC404
ul
) (S701) (S701) (S702) (S704) (S706) (S708)
56 CONTROL RIGHT CONTROL LEFT CONTROL SET FLASH
(KEY AD2) (PK-55 board) (PK-55 board) (PK-55 board) (PK-55 board)
(IC404
i;
) (S701) (S701) (S701) (S705)
57 STEADY SHOT
(KEY AD3) (CF-83 board)
(IC404
ia
) (S403)
58 PROGRAM AE+ PROGRAM AE– PROGRAM AE WHITE BALANCE ONE-PUSH SPOT METER
(KEY AD4) (AE-25 board) (AE-25 board) (AE-25 board) (AE-25 board) WHITE BALANCE (AE-25 board)
(IC404
is
) (S356) (S355) (S354) (S353) (AE-25 board) (S351)
(S352)
59 OPEN
(KEY AD5) (FLASH)
(IC404
id
) (FLASH UNIT)
Display Code
C:32:01
C:13:01
E:91:01
E:61:00
E61:10
Countermeasure
Change the disk and turn off the main
power then back on.
Replace the floppy disk or “Memory
Stick”.
Format the floppy disk or “Memory Stick”
with the MVC-FD97.
Checking of flash unit or replacement of
flash unit
Checking of lens drive circuit
Cause
Defective floppy disk.
• The type of floppy disk that cannot be
used by this machine, is inserted.
(Such as 2DD)
• Data is damaged.
• Unformatted disk or “Memory Stick”
is inserted.
Abnormality when flash is being
charged.
When failed in the focus initialization.
Caution Display During Error
DRIVE ERROR
DISK ERROR
MEMORY STICK ERROR
Flash LED
Flash display
Flashing at 3.2 Hz
—
*1