Sony FD Mavica MVC-FD97, Руководство по обслуживанию

Страница: 93 / 144

5-25
13. Color Reproduction Adjustment
Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
13-1. Color Reproduction Adjustment (Without ND Filter)
Mode CAMERA
Subject Color bar chart
(Color reproduction adjustment
frame)
Adjustment Page F
Adjustment Address 41 to 48, 5C to 5F
Note 1:
Perform “Auto White Balance Standard Data Input”
before this adjustment.
Note 2: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of the unit OFF/ON.
Note 3:
“Color Reproduction Adjustment” is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
4
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
5 B 75 Note down the data.
6 B 75 00 Press PAUSE button.
7 6 01 AB Press PAUSE button.
8 6 12 80 Press PAUSE button.
9 Wait for 1 second.
10 6 12 00 Press PAUSE button.
11 Wait for 2 seconds.
12 6 01 A9 Press PAUSE button. (Note 4)
13 6 02 Check the data changes to “01”.
Note 4:
The adjustment data will be automatically input to
page: F, address: 41 to 48 and 5C to 5F.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 B 75
Set the data noted down at
step 5, and press PAUSE
button.
3 5 F1 FF
4 D 63 40 Press PAUSE button.
5
Release the data setting
performed at step 4.
(Refer to page 5-14)
6 0 01 00
7
Perform “Color Reproduc-
tion Check”.
13-2. Color Reproduction Adjustment (With ND Filter)
Mode CAMERA
Subject Color bar chart
(Color reproduction adjustment
frame)
Adjustment Page F
Adjustment Address 51 to 58, 60 to 63
Note 1:
Perform “Auto White Balance Standard Data Input” and
“Auto White Balance ND Filter Compensation” before
this adjustment.
Note 2: Check that the data of page: 6, address: 02 is “00”. If
not, turn the power of the unit OFF/ON.
Note 3:
“Color Reproduction Adjustment” is available only once
after the power is turned on. Turn the power off, then on
again if the adjustment is retried.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
4
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
5 F 27 Note down the data.
6 F 27 80 Press PAUSE button.
7 B 75 Note down the data.
8 B 75 00 Press PAUSE button.
9 6 1C 03
10 Wait for 1 second.
11 6 01 C3 Press PAUSE button.
12 6 12 80 Press PAUSE button.
13 Wait for 1 seconds.
14 6 12 00 Press PAUSE button.
15 Wait for 2 seconds.
16 6 01 C1 Press PAUSE button. (Note 4)
17 6 02 Check the data changes to “01”.
Note 4: The adjustment data will be automatically input to
page: F, address: 51 to 58 and 60 to 63.