Sony FD Mavica MVC-FD97, Руководство по обслуживанию

Страница: 86 / 144

5-18
3-2. Flange Back Adjustment (2)
Perform this adjustment after performing “Flange Back Adjust-
ment (1)”.
Mode CAMERA
Subject Subject more than 500 m away
(Subjects with clear contrast such
as buildings, etc.)
Measurement Point Check operation on the LCD
Measuring Instrument screen
Adjustment Page F
Adjustment Address 14 to 25
Adjusting method:
Order Page Address Data Procedure
1
Set the zoom lens to the
TELE end and expose a
subject that is more than 500
m away (subject with clear
contrast such as building,
etc.). (Nearby subjects less
than 500 m away should not
be in the screen)
2 0 01 01
3 5 F1 FF
4 D 63 40 Press PAUSE button.
5
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
6 6 01 13 Press PAUSE button.
7
Place the ND filter on the
lens so that the optimum
image is obtain.
8 6 01 29 Press PAUSE button. (Note 1)
9 6 02 Check the data changes to “01”.
Note 1: The adjustment data will be automatically input to
page: F, address: 14 to 25.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 5 F1 00
3 D 63 00 Press PAUSE button.
4
Release the data setting
performed at step 5.
(Refer to page 5-14)
5 0 01 00
6 Perform“Flange Back Check”.
4. Flange Back Check
Mode CAMERA
Subject Siemens star
(2.0 m from the front of the lens)
(Luminance: approx. 200 lux)
Measurement Point
Check operation on the LCD
Measuring Instrument
screen
Specified value Focused at the TELE end and
WIDE end
Checking method:
Order Page Address Data Procedure
1
Place the Siemens star 2.0 m
from the front of the lens.
To open the IRIS , decrease
the luminous intensity to the
Siemens star up to a point
before noise appear on the
image.
2 0 01 01
3 5 F1 FF
4 D 63 40 Press PAUSE button.
5
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-14)
6
Shoot the Siemens star with
the zoom TELE end.
7
Check that the lens is
focused.
8 6 2C 01
9
While observe the LCD
screen, change the zoom to
the WIDE end and check that
the lens is focused.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 2C 00
2 5 F1 00
3 D 63 00 Press PAUSE button.
4
Release the data setting
performed at step 5.
(Refer to page 5-14)
5 0 01 00