Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
43(128)
Step-by-Step Instructions
4.
Using a torque screwdriver set to 11 N·cm and a JCIS
No. 0 bit, install a
new
hinge brace screw into each of
the hinge brace screw locations.
NOTE! If a new inner base cover was installed, verify
that a Bluetooth antenna, a magnet, and a
liquid intrusion indicator have been installed
on the new inner base cover. If any of these
components are not present, refer to the
installation section of the missing
component(s) for instructions on how to
install the missing part(s).
•
Starting with the “Outer Base Cover Installation” section, perform the remaining base
reassembly sections to complete the reassembly of this phone.
