Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
93(128)
Step-by-Step Instructions
NOTE! Use tweezers to handle the new co-brand
label once it has been separated from its
protective backing so that contamination of
its adhesive is avoided.
4.
Using tweezers, position the new co-brand label in its
designated area on the inner base cover.
NOTE! Make sure that all edges of the co-brand label
are within the recessed area designated for it.
5.
Once the co-brand label is correctly positioned,
carefully smooth the label into place.
•
No further reassembly required
