Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
6(128)
2.1.2
Battery Removal
All of the sections of the Base Disassembly preceding this section must be performed in
sequential order before the disassembly steps listed below can be performed.
Tools needed:
•
Pry Tool
Step-by-Step Instructions
1.
At the end of the battery closest to the system
connector, catch the flat end of a pry tool on the
accessible portion of the battery that is adjacent to
the system connector.
2.
Using the pry tool, push the battery towards the
camera while simultaneously lifting the end of the
battery. The end being lifted should come free from
the battery cavity.
3.
Once one end of the battery is free from the battery
cavity, lift the battery away from the phone.
NOTE! Do not tap the phone against a hard surface
in an attempt to get the battery out. Damage
to the phone may result!
