Working Instruction
,
Mechanical
3/00021-1/FEA 209 544/594 B
©
Sony Ericsson Mobile Communications AB
5(128)
2
Base
2.1
Base Disassembly
The disassembly of the base portion of this product is broken down into sections by the
components that need to be removed to perform the disassembly. The sections that make up the
“Base Disassembly” procedure are arranged in the order that they must be performed to properly
disassemble the base portion of this product. If your task is to replace one of the components
that is removed during the base disassembly, just perform the sections of the base disassembly
through to the point that the part you are trying to replace is removed.
2.1.1
Battery Cover Removal
Tools needed:
None
Step-by-Step Instructions
1.
Using your thumbs, slide the battery cover towards
the system connector until a 5 to 6 MM gap forms
between the battery cover and the edge of the battery
opening adjacent the camera.
NOTE! The battery cover will not slide more than
5 or 6 MM.
2.
Once battery cover has been slide 5 to 6 MM
towards the system connector, lift the battery cover
away from the phone.
