SKF IMx-M, Руководство пользователя, Страница: 90 / 293

Protection
IMx-M Manager
2 - 76
SKF Multilog O
n-Line System IMx-M
User Manual
Figure 2 - 57.
Checking for Circuit Faults by Sending CF Command.
For circuit fault diagnostic conditions and descriptions, see Circuit Faults (cf).
Establishing a Connection between Host PC and Protection Module
Connection between the host PC and the protection module can be done in two
different ways.
Using a Mini-USB Cable
The actual physical connection between the host PC and the protection module
is described in the Protection Module Serial (USB) Interface chapter.
Refer to "Serial Communication" Menu Selection for the
selection of COM port
.
Using an Ethernet Cable
Downloading the slot configuration file to a protection module using an
Ethernet cable is done via @ptitude Observer. For detailed information, refer to
@ptitude Observer Use
r Manual (Document Part Number 32170900).
Getting Protection Configuration from Protection Module
In order to get the protection configuration that is in use by the protection module and
update the IMx-M Manager with it, do the following:
•
Establish a Connection between Host PC and protection module.
•
Get the Protection configuration file by performing Get PRM Config from device
via PRM Serial Command.