Protection
Protection Module Configuration with IMx-M Manager
2 - 110
SKF Multilog O
n-Line System IMx-M
User Manual
Alarm Levels
Alarm levels are divided into Alert and Danger (See Alarms section). The actual
available settings are dependent on the selected channel type.
Table 2-24: Sensor type alarm levels.
Type
Low
High
Enter
Time
Trip
Multiply
Factor
Trigger
Relay
Hysteresis
Temperature
√
√
√
√
√
Radial shaft vibration
√
√
√
√
√
Position
√
√
√
√
√
Complementary
Differential Expansion
(individual ch)
Piston Rod Drop
(Average Mode)
√
√
√
√
√
Piston Rod Drop
(Triggered Mode)
√
√
√
√
√
Casing vibration
√
√
√
√
√
Eccentricity
√
√
√
√
Other
√
√
√
√
√
•
Low and High:
these check boxes enable or disable the associated alarm
setting.
A channel going into Danger state will always cause the channel
to Alert state as well, even if Alert setting was disabled. In such
case, the channel status is Alert and Danger.