SKF IMx-M, Руководство пользователя, Страница: 57 / 293

Protection
Protection
Part Operation
SKF Multilog On
-Line System IMx-M 2 - 43
User Manual
Local Display and Local Display Selection Keypad
The local display and local display selection keypad are located on the front of each
condition monitoring module (CMM).
They are used to locally control and supervise the protection part.
•
The display is normally in screen saver mode (off) and is activated when a key is
pressed on the keypad. The screen saver is reactivated after 10 minutes of key
inactivity.
•
Use the keypad to navigate through the menus, the white help text at the bottom of
the display describes the key functionality in each menu.
Figure 2 - 20.
Local Display and Selection Keypad.
Menu tree:
•
Bar graph Display
– Bar graph 1
– Bar graph 2
• Buffer Outputs Front
– Buffered output 1, Analog
– Buffered output 2, Analog
– Buffered output 3, Digital
•
Channel Values
– Analog channel 1-16 and Combined measurement 1-8
– Analog channel 1-16 bias (same as Gap)
– Digital channel 1-8
– Digital channel peak 1-8