SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 88 / 384

Industrial Clean instruction manual
10
15/02/12 Rev:1.0.0
WARNING:
TECNOPLUS S.R.L. declines any form of responsibility or guarantee if the purchaser,
or anyone in his stead, makes even the slightest modifi cation or adjustment to the purchased product.
The unit has been designed to satisfy at best the present needs of the domestic central vacuum clea-
ners market, both in terms of quality and operating capacity.
All materials and components used to manufacture this product comply with CE safety regulations. All
relevant certifi cations are held at TECNOPLUS S.R.L. headquarters.
5.1 IP Protection Degree
IP 20: The appliance features a protection against solid objects having a size exceeding 12 mm. The
appliance is not protected against water penetration.
5.2 Electric insulation degree
CLASS I: the appliance features basic electrical insulation.
It must be connected to the grounding circuit through the main electric wiring.
5.3 Declaration of absence of dangerous substances
TECNOPLUS S.r.l. declares that its products and appliances have been manufactured with materials
which comply with the restrictions established by the health and environment protection regulations in
force and do not contain SVHC-classifi ed substances (Substance of Very High Concern) in compliance
with CE regulation 1907/2006 (REACH: i.e. Registration, Evaluation, Authorization and Restriction of
Chemical Substances). Although these substances have not been used during the processing cycles of
raw materials and during the manufacturing cycles of our products, their presence in p.p.m. (parts per
million) cannot be completely excluded due to micro-pollution of raw materials.
5.4 Fixed closure safety guards
The access to the electric parts is protected by a cover which can only be removed by unscrewing the
Torsen screws used to fi x the soundproofi ng dome of the housing where the suction motors are assem-
bled.
Every intervention on the control board and on the motors must be carried out by qualifi ed personnel
only after disconnecting the electrical power supply and by removing the electric plug from the electric
inlet.
IP20