SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 126 / 384

Industrial Clean instruction manual
48
15/02/12 Rev:1.0.0
Press Enter to access the submenu se-
lected.
Use the
up and down arrows to scroll the
menu;
Press
ESC to exit the menu.
1
11.3.3.5 Installation parameters menu
Through this menu it is possible to change the parameters set during machine start up (see paragraph
11.3.1).
INSTALLATION PARAM.
DATA TRANSMISSION
RESET PARAMETERS
TRIAL AND TEST
PRESS ENTER
˄˅
ACTIVATION
AUTOCLEANER
DAYTIME
DAILY TIME
PRESS ENTER
˄˅
DAYTIME
08:00 20:00
inizio---- fi ne
PRESS ENTER
˄˅
If “ daytime ” is selected the following screen
display is activated. Through this it is pos-
sible to change the Autocleaner system’s
functioning time period.
6
Use the up and down arrows to change
the data.
Use the
right and left arrows to change
hours and minutes.
Press
Enter to access the following scre-
en display.
7
AUTOCLEANER ALARM
ACTIVATE MACHINE
STOP?
YES NO
< > PRESS ENTER
ARE YOU SURE?
YES NO
< > PRESS ENTER
Through this screen display it is possible
to choose to stop or not to stop the machi-
ne when the alarm appears.
The machine stop will occur only 15
minutes after alarm display. In case the
stop option is chosen, after cancelling
the alarm on the control computer, it
will be necessary to remove and plug
in the fl exible hose again in the socket.
8