5865-3 and 5865-4 LED Annunciator
Product Installation Document
PN 151088:D 03/12/2018
ECN 18-0103
1.1 Description
The 5865-3 and 5865-4 are LED Annunciators that provide you with 30 programmable LED’s (15 red, 15 yellow). 5865 connects to the panel via
the SBUS.
1.1.1 Specifications
1.2 Mounting the 5865-3
The 5865-3 mounts into a standard 3-gang electrical box. Follow these steps to mount the 5865-3:
1.
Make sure that the 5865-3 is properly wired to the control panel. See Figure 1.2.
2.
Place the 5865-3 into the 3-gang electrical box. See Figure 1.1.
Figure 1.1 : 5865-3 Mounting
3.
Place cover plate over the top of the 5865-3 and align the holes. See Figure 1.1.
4.
Insert the six cover plate screws into six screw holes on the 3-gang electrical box.
5.
Screw the six cover plate screws all the way in until the cover plate fits firmly against the 5865-3 and the electrical box. Do Not over tighten.
1.3 Mounting the 5865-4
The 5865-4 mounts into a standard 4-gang electrical box. Use the same procedure as used for mounting the 5865-3.
Max. Line Resistance
50
Max. Alarm Current
145mA
Standby Current
35mA
Max. Voltage
24VDC
Operating Temperature
0° to 49° C
(32° to 120° F)
Indoor Use Only
NOTE:
The 5865-4 uses 8 cover plate screws.
cover plate
5865-3
3-gang
electrical box
cover
plate
screw