SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 92 / 384

Industrial Clean instruction manual
14
15/02/12 Rev:1.0.0
9 - INSTALLATION
- WARNING -
THESE PROCEDURES MUST BE CARRIED OUT
BY QUALIFIED STAFF
9.1 RECOMMENDED INSTALLATION
The Industrial Clean dust separator combined with one or more blowing motors must be connected to an
exhaust air pipe, crucial for discharging outside the micropowders that the fi lter cartridge cannot retain.
The vacuum cleaner must be installed in service rooms (e.g. garage, store room etc) protected from bad
weather, dampness and excessive temperature variations (
working environment temperature “-5 ÷
45°C”, relative humidity 20 ÷ 85% without moisture or freezing ). Install the unit in a place far from
heat sources such as stoves and radiators (N.B: the unit features IP 20 protection degree).
During the set up phase, we suggest to always carefully check that the unit is positioned in the most sui-
table location selected for the system. Check also that suffi cient space has been allowed for installation,
use and maintenance purposes and for an optimal recirculation of the air around the vacuum cleaner.
Construction features allow the vacuum cleaners to be connected to the pipe system with pipes coming
either from right or left sides. In case of multi-storey vacuum cleaning system, we suggest you to install
the unit on the lowest available fl oor.