SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 144 / 384

Industrial Clean instruction manual
66
15/02/12 Rev:1.0.0
Level 2/Maintenance 2 Alarm:
• check the functioning of the motor group’s impeller (dust inside it)
• everything mentioned in level 1
Also in this case the operator can decide whether to switch off the system immediately and satisfy main-
tenance requirements or fi nish his job.
12.3 Cleaning the machine body (cylinder)
Periodically clean the outside casing of the appliance using a soft damp cloth with water and neutral soap.
Important: only use water or neutral soap and water to clean the appliance. The use of other sol-
vents or alcohol can entail damages. Check the system surface is completely dry before switching
it back on.
Always use a suitable mask to protect against airborne dust and wear latex gloves to protect the skin of
your hands.
12.4 Emptying the dust bin
Use both hands to raise the
release handle
1
Remove the dust container 2
Remove the conveyor cone and
the bag-stretcher
3