SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 90 / 384

Industrial Clean instruction manual
12
15/02/12 Rev:1.0.0
6 - CORRECT USE OF THE APPLIANCE
The Industrial Clean dust separator has been designed exclusively to vacuum clean dust, very small-
size solids and dry materials.
The use of the dust separator is authorised in industrial contexts through connection to a wall-traced
pipe network and to a standard home electrical wiring.
The Industrial Clean Small e Big dust separators have to be used combined with one or more
blowing motors in installations planned to support an air fl ow up to 700 m
3
/h for the Small ver-
sion and up to 1200 m
3
/h for the Big version.
These components are used in installations presenting the following characteristics:
- Mounting coloumn measuring 63/80 mm (for the Small version), or 63/80/100 mm (for the Big version),
based on the confi guration chosen.
- Dust inlet measuring 80 mm (Small) or 100 mm (Big).
- Monophasic supply 220/240 V.
- Possibility for up to 4 contemporary users to use the installation for the Small model, or up to 8 con-
temporary users for the Big model (see table on page 5).
7 - INCORRECT USE OF THE APPLIANCE
It is extremely important NOT to use the appliance in the following circumstances which are con-
sidered to be inappropriate and dangerous:
• The system must not be used to vacuum clean fabrics, heavy or hot/burning materials.
• The system must not be used to vacuum clean liquids.
Furthermore the system has not been designed for use in environments with risk of explosion,
and therefore:
• it is forbidden to suction clean materials with high-explosion risk (gunpowder) or materials which are
individually inert but that, once collected and mixed in the dust bin, could provoke dangerous chemical
reactions.
• It is absolutely forbidden to use the vacuum cleaner in explosive atmosphere or outside the standard
temperature, pressure and humidity levels (see paragraph 9.1).
• Do not vacuum any material which may cause electrostatic charges in the piping system, if not
previously communicated to the constructor.
Any use of the appliance other than those specifi ed above is forbidden.
Any change or modifi cation made to the system in order to vacuum clean a particular type of
material must obtain the prior written approval of the manufacturer.
The use of the system for purposes other than those for which it was manufactured, represents
an irregular condition which can cause damage to the product and seriously compromise the
operator’s safety.