background image

1

Shading Systems

Vantage and Legrand Shading

Integration Guide

D000128    Rev. 3   4/22

QzHub3 and QIS

OVERVIEW

This integration guide is for Vantage installers and technicians that are installing either wired QIS Shades or the ZigBee shades with 

the QzHub3. This is a step-by-step guide how to connect either the QIS or Qz Bus objects into Design Center and commission the 

shades and shade groups to the project.

Description

Specification

Model Number(s)

QzHub3 and QIS Power Panel

DC Version - QIS

3.7+

DC Version - QzHub

4.2.1

Widget

Shade

Description

Specification

Widget Category

Shades/Blinds

Connection Type

Serial (RS-485) for QIS and 

Ethernet for QzHub3

Shade Icons

Bus Icons

QIS Shade Object Icon

Qz Shade Object Icon

QIS Bus Object Icon

Qz Bus Object Icon

Feature

EQ 40 & Keypads

EQ41, EQ73 & EQ Apps

QIS

Qz

QIS

Qz

Open / Close / Stop

Open / Close / Stop Control - All shades and/or groups
Position Control

Specific position for all shades and/or groups
Visual Feedback

Graphic display position of all shades and/or groups
Configure Presets

Set up user-defined presets for shade groups

DESIGN CENTER ICONS

USER INTERFACE

Supported

Task Support Only

Not Supported

INSTALLATION

Installation of Vantage products should be performed or supervised by a Certified Vantage Installer. This product is very versatile and 
its capabilities and limits must be fully understood to use effectively.

Содержание QMotion QzHub3


















Отзывы: