LEGRAND QMotion QzHub3 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 17

LEGRAND QMotion QzHub3 Скачать руководство пользователя страница 6

6

PAIRING SHADES TO THE QZHUB3

Legrand Shading System’s ZigBee shades use the QzHub3 as a gateway for ZigBee communications. The QzHub3 will handle
communication with the controller for control and configuration of shades using Ethernet. The QzHub3 can handle up to 100 devices
( r range extender = 100). All 100 devices can be directly connected to QZHub3.

The programmer will need to activate the QzHub3 via the QzHub App to join the shades to the hub before programming them in
Design Center. The QzHub3 is the communications gateway between Qadvanced shades and the InFusion Controller. Each system
can support one Qz3 Bus.

To use the QzHub3 with Vantage, you must first join the shades to the hub through the QzHub App. This is available for download
from the iOS and Android App stores. For detailed instructions, refer to the QzHub App User Guide.

ZIGBEE QZHUB3 INTEGRATION - VANTAGE AND LEGRAND SHADES

1.

You will first need to create an account. You can use a

personal email and transfer the hub once the integration is
done or use the homeowner’s email.

2.

Next, you will need to pair the QzHub3 to the

account. Select

QzHub3

on the

Choose your Hub

page. Press

Add

at the bottom of the page, and select

Add a Hub

.

«
...
4
5
6
7
8
...
»

Содержание QMotion QzHub3


















Отзывы:

Нет отзывов