9
QZHUB3 INTEGRATION WITH VANTAGE
(continued)
4.
Return to your software, select the
Activate
Tab, type
the Integration code from the app and press
Activate
.
When successful, DC will alert you and the property tab
will auto populate the rest of the fields.
5.
To add shades, under
Bus view
, right-click the
QZ Bus 3
and select
Discover Shades
. This will populate all shades that
are currently paired to your QzHub3. Once shades populate,
Program your controller (
F5
).
QZHUB3 LIVE CONTROL AND FEEDBACK
The
Object Editor
for Qz shades will contain a panel with controls that allow live control and feedback of the selected shade. This
panel appears when there is a live connection to the controller, and the controller has been programmed. The panel contains controls
for shade identification using the
Jog Shade
,
Open
,
Close
, and
Stop
buttons. Also, a graphical representation of the shades at its
current position is displayed. The graphical shade will also act as a slider to set the position of the shade – click and hold the bottom
edge of the shade to move up or down as wanted then release.
NOTE:
The slider operation will not position the shade correctly until the lower limit has been set.
QzHub Live Control Editor with close, stop, open, and etc.
Control buttons only appears when the system is programmed
and Design Center has a live connection to the controller.
Live Control Editor with close, stop, and open buttons, and the
Configuration (limits) tool selected .
SET SHADE LIMITS
Please see
Configure Shades: Set Shade Limits
(pg 2)