SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 140 / 384

Industrial Clean instruction manual
62
15/02/12 Rev:1.0.0
11.5.3 Ethernet alarm
11.5.4 Filter alarm
The system requires fi lter cleaning. If the active machine block was selected, suction will stop 15 minu-
tes after that the warning notice has been displayed.
28/11/11 10:45
!!WARNING!!
REQUEST
IP ADDRESS
˄˅
28/11/11 13:48
!!WARNING!!
CLEAN FILTER
CARTRIDGE
˄˅
INSTALLATION PARAM.
DATA TRANSMISSION
RESET PARAMETERS
TRIAL AND TEST
PRESS ENTER
˄˅
ENTER IP ADDRESS
ETHERNET CARD
192.168.000.080
< > PRESS ENTER
˄˅
ALARM
FILTER
CLEAN FILTER
CARTRIDGE
ESC TO EXIT
If at the end of the start-up procedure the
following alarm notice appears, it means
that the machine has been connected to the
optional Ethernet board and therefore the
management system requires to enter the IP
address.
1
To effect this setting, carry out the opera-
tions described in the following screen dis-
plays.
Access the
Main Menu and select “ data
transmission ”.
2
Change the IP address using the up , down ,
right and left arrows and press Enter to
save the data.
First warning notice, suction does not stop.
Second warning notice, suction stops if the
machine block was activated; press
ESC to
cancel the alarm. To start suction again the
fl exible hose must be removed and plugged
in again.
3
1
2