SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 98 / 384

Industrial Clean instruction manual
20
15/02/12 Rev:1.0.0
A
B
9.5 Fixing the appliance
The unit does not need any special fi xing device. For a correct and safe positioning, it is however neces-
sary to check that the location selected for installing the unit features the following min. requirements:
- a solid, perfectly fl at and horizontal bearing surface;
- the surface must not vibrate. Furthermore it is of utmost importance to avoid any unevenness of the
bearing surface that could make the unit unstable.
9.5.1 Connection to the piping network (see picture)
The intakes for the connection to the suction pipes of the network and to the pipes exhausting the air
outside can be assembled either on the right or left side of the unit.
10 STARTING THE MACHINE
10.1 Control board
The Industrial Clean dust separator features a control board from which the appliance functions can be
programmed by means of a simple operator’s interface display with 6 function keys.
From the control board (display) it is possible to control and set the routine maintenance operations;
the vacuum cleaning sockets are distributed in the various rooms and connected through the piping
network.
For this reason, the operator is never directly in contact with the appliance while the system is working,
apart from starting operations (see paragraph 11.3.2) and use of the vacuum cleaner (see paragraph 11).
Using the sleeve and the metal
clamps delivered with the unit,
connect the unit to the air suc-
tion pipe.
Using the sleeve and the metal
clamps delivered with the unit,
connect the unit to the suction
pipe of the blowing motor.
Suction pipe of
the piping net
Connection pipe to
the blowing motor
A
B