SISTEM AIR Industrial Clean Basic, Техническое руководство

Страница: 96 / 384

Industrial Clean instruction manual
18
15/02/12 Rev:1.0.0
9.3 Positioning of the appliance
For a correct use and to facilitate maintenance it is advisable to keep a minimum distance of 60 cm on
three sides around the appliance (excluding the side on which it is fi xed to the wall).
9.4 Transforming DX version (outlet pipes fi tted on the right) into SX version
(outlet pipes fi tted on the left)
The units are generally supplied with suction and exhaust pipes on the right side (RIGHT version). If
needed, the system can be transformed so to have both suction and exhaust pipe connections on the
left side (LEFT version).
To do this:
After exchanging their housings, re-
assemble the intake of the “A” suction
pipe and the “B” closing plate by faste-
ning the screws.
Now rotate by 180° the intake of the
suction pipe as shown in the picture.
Disassemble the intake of the “A”
suction pipe and the “B” closing
plate by removing the screws.
2
1
B
A
B
A