Sindoh D310 Series, Руководство пользователя

Страница: 129 / 324

10.2 Configuring the IP address fax environment 10
[Web Management Tool] 10-10
10.2 Configuring the IP address fax environment
Overview
The IP address fax function is a function used to send and receive faxes within a limited network such as
enterprise network. In addition to IP address, you can also use a host name and E-mail address to specify
the destination.
The SMTP protocol is used to send and receive IP address faxes. Because the SMTP server function of this
machine sends and receives data, no server is required when sending or receiving a fax by specifying the IP
address of the remote machine.
When using the IP address fax function, follow the below procedure to configure the settings.
0
To use the IP Address Fax function, ask your service representative to configure settings. For details,
contact your service representative.
0 To use this function, the optional Fax Kit is required.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
%
For details on configuring the setting, refer to page 2-2.
2
Configure basic settings for sending and receiving faxes using IP address fax
%
For details on configuring the setting, refer to page 10-10.
3
Set the following options according to your environment
Configure basic settings for sending and receiving faxes using IP address
fax
Enable the IP address fax function. In addition, configure settings for sending and receiving faxes, sender
information of this machine, and operation mode for IP address fax.
1
In the administrator mode, select [Network] - [Network Fax Setting] - [Network Fax Function Settings],
and then set [IP Address Fax Function Settings] to [ON] (Default: [OFF]).
2
In the administrator mode, select [Network] - [Network Fax Setting] - [SMTP TX Setting], then configure
the following settings.
3
In the administrator mode, select [Network] - [Network Fax Setting] - [SMTP RX Setting], then configure
the following settings.
Purpose Reference
Change of default compression type setting for transmission in black and white page 10-11
Change of default compression type setting for transmission in color page 10-11
Settings Description
[Port No.] If necessary, change the port number of the E-mail server (SMTP).
In normal circumstances, you can use the original port number.
[25] is specified by default.
[Connection Timeout] Change the timeout period for a communication with the E-mail server (SMTP),
as required.
[60] sec. is specified by default.
Settings Description
[SMTP RX] Select [ON] to use the IP address fax function.
[OFF] is specified by default.
[Port Number] If necessary, change the port number of the E-mail server (SMTP).
In normal circumstances, you can use the original port number.
[25] is specified by default.