Sindoh D310 Series, Руководство пользователя

Страница: 70 / 324

[Web Management Tool] 7-9
7.2 Configuring the SMB transmission environment 7
- To specify a destination computer using the host name, configure the appropriate machine settings and
prepare the appropriate environment so that name resolution can be performed with DNS or LLMNR.
To perform name resolution with DNS, a destination computer can be specified with "Host Name (ex-
ample: host1)" or "FQDN (example: host1.test.local)".
To perform name resolution with LLMNR, a destination computer can be specified only with "Host
Name (example: host1)".
Configuring basic settings for the SMB transmission
Enable the SMB Send function. Also, specify the authentication method for SMB transmission, and select
whether to enable the SMB signature.
In the administrator mode, select [Network] - [SMB Setting] - [Client Setting], then configure the following set-
tings.
Tips
- In Mac OS X 10.7 or later, set [SMB Authentication Setting] to [NTLM v1/v2].
- In Mac OS X 10.7 or later, the direct hosting SMB service must be enabled (default: [ON]). For details,
refer to page 7-10.
Using the WINS server
If the WINS server is installed to resolve the name, set the WINS server address and the name resolution
method.
In the administrator mode, select [Network] - [SMB Setting] - [WINS/NetBIOS Settings], then configure the
following settings.
Settings Description
[SMB TX Setting] Select [ON] to use the SMB transmission function.
[ON] is specified by default.
[SMB Authentication
Setting] Select an authentication method for SMB transmission according to your en-
vironment.
•
[NTLM v1]/[NTLM v2]/[NTLM v1/v2]: Select this to use the function in the
NT domain environment. If you select [NTLM v1/v2], NTLMv1 authentica-
tion is performed when NTLMv2 authentication fails.
• [Kerberos]: Select this to use the function in the Active Directory domain
environment.
• [Kerberos/NTLM v1/v2]: Select this to use the function in an environment
both the Active Directory domain and NT domain exist in. NTLMv2 authen-
tication is performed when Kerberos authentication fails, and NTLMv1 au-
thentication is performed when NTLMv2 authentication fails.
[NTLM v1] is specified by default.
[SMB security Signa-
ture Setting] Select whether to enable the SMB signature of this machine to suit your envi-
ronment.
•
[Disable]: Disables the SMB signature of this machine.
• [When Requested]: Enables the SMB signature of this machine (client) only
when the SMB signature is requested from the server side. If the SMB sig-
nature is not requested from the server side, operations are performed
while the SMB signature of this machine (client) remains disabled, and a
connection is possible even when the SMB signature in the server side is
disabled.
• [Required]: Enables the SMB signature of this machine. To establish a con-
nection, the SMB signature is also required in the server side. If the SMB
signature in the server side is disabled, it will not be possible to make a
connection.
[When Requested] is specified by default.
Settings Description
[WINS/NetBIOS] Select [ON] to use the WINS server.
[ON] is specified by default.
[Auto Obtain Setting] Select [Enable] to automatically obtain the WINS server address.
This item is necessary when DHCP is enabled.
[Enable] is specified by default.