Sindoh D310 Series, Руководство пользователя

Страница: 80 / 324

[Web Management Tool] 7-19
7.7 Searching for a destination using the LDAP server 7
[Search Base] Specify the starting point to search for a destination (using up to 255 charac-
ters).
The range from the entered origin point, including the following tree structure,
is searched.
Example of entry: "cn=users,dc=example,dc=com"
[Timeout] If necessary, change the time-out time to limit a communication with the LDAP
server.
[60] sec. is specified by default.
[Max.Search Results] Change the maximum number of destinations to be displayed as search re-
sults, if necessary.
[100] is specified by default.
[Authentication Meth-
od] Select the authentication method to log in to the LDAP server.
Select one appropriate for the authentication method used for your LDAP serv-
er.
•
[anonymous]: [Login Name], [Password], and [Domain Name] can be omit-
ted.
• [GSS-SPNEGO]: Log in to the server using the Kerberos authentication
method. Select this to use the Active Directory.
[anonymous] is specified by default.
[Login Name] Log in to the LDAP server, and enter the login name to search for a destination
(using up to 64 characters).
[Password] Enter the password of the user name you entered into [Login Name] (using up
to 64 characters, excluding ").
To enter (change) the password, select the [Password is changed.] check box,
then enter a new password.
[Domain Name] Enter the domain name to log in to the LDAP server (using up to 64 characters).
If [GSS-SPNEGO] is selected for [Authentication Method], enter the domain
name of Active Directory.
[Select Server Authenti-
cation Method] Select the LDAP server authentication method.
•
[Set Value]: Use the settings of [Login Name], [Password], and [Domain
Name].
• [User Authentication]: Synchronizes with the user authentication of this ma-
chine. Uses the user name and password of the registered user of this ma-
chine as [Login Name] and [Password].
• [Dynamic Authentication]: The system prompts you to enter the user name
and password at LDAP searching.
[Set Value] is specified by default.
[Use Referral] Select whether to use the referral function, if necessary.
Make an appropriate choice to fit the LDAP server environment.
[ON] is specified by default.
[Search Condition At-
tributes] Select attributes to be specified when performing the LDAP search.
The setting can be switched between [Name] (cn) and [Nickname] (display-
Name).
[Name] is specified by default.
[Search] Select [ON] to display candidate destinations when entering a part of the name
to search for a destination via the LDAP server.
[OFF] is specified by default.
[Initial Setting for
Search Details] Specify LDAP search conditions.
[Search Attributes Au-
thentication] Select this check box to enable the attribute-based authentication when [Au-
thentication Method] is set to [Simple] and [Select Server Authentication Meth-
od] to [Dynamic Authentication].
If this check box is selected, the user does not need to enter all of the DN (Dis-
tinguished Name) when performing authentication via the LDAP server.
At [Search Attribute], enter the search attribute to be automatically added be-
fore the user name. In normal circumstances, specify "uid" before the user
name, however, depending on your environment, you need to specify other at-
tribute such as "cn".
[uid] is specified by default.
Settings Description