Siemens SIMOTICS S-1FL6, Руководство по эксплуатации

Страница: 7 / 432

Preface
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 04/2019, A5E36037884-007
5
Warranty
Details of warranty
● Warranty period
The warranty period for a product that was purchased (hereinafter call "product") is
subject to the signed contract and limited to a maximum of 24 months after manufactured.
● Warranty scope
Siemens shall replace or repair a defective product free of charge if a defect attributable
to Siemens occurs during the warranty period stated above. This warranty does not cover
defects caused by the product reaching the end of its service life and replacement of
consumables or parts with limited service life.
This warranty does not cover failures that result from any of the following causes:
–
Natural wear and tear;
– Handling of the product not in conformity with the product instruction or user manual;
– Unauthorized or inappropriate modifications, alterations or repairs;
– Damages from faulty or negligent handling, use or maintenance, overload conditions;
– Excessive strain or use of unsuitable appurtenances;
– Defective installation or erection not carried out by Siemens;
– Inappropriate storage or any other external impact on the product not explicitly
assumed by Siemens;
– Device (drives, motors) damages due to use of the improper cable that you made
yourself;
– Improper handling, abuse, or use in unsuitable conditions or in environments not
described in product catalogs or manuals, or in any separately agreed-upon
specifications;
– Causes not attributable to the product itself;
– Abuse of the product in a manner in which it was not originally intended;
– Causes that were not foreseeable with the scientific and technological understanding
at the time of shipment from Siemens;
– Malfunctions arising from natural or man-made disasters or events not attributable to
Siemens.
Limitations of liability
● In no event is Siemens responsible for any loss of use, production, profit, interest,
revenues, loss of information or data, damages or indemnification based on the
customer’s third party contracts or any indirect or consequential damages or losses,
regardless of whether those damages are foreseeable.
● The information described in product catalogs or manuals is provided for the purpose of
the customer purchasing the appropriate product for the intended application. The use
thereof does not guarantee that there are no infringements of intellectual property rights
or other proprietary rights of Siemens or third parties, nor does it construe a license.