Servomex 07931001B, Руководство оператора

Страница: 68 / 221

54
© Servomex Group Limited. 2020 07931001B revision 6
Calibrate the mA outputs
Figure 4-14: mA output calibration and override menu
Supervisor level is required to calibrate the mA outputs. Select the mA output to be
calibrated, 1 or 2 and scroll down to calibrate screen. As soon as the mA output
calibrate screen is shown, the nominal mA output value is set to 20 mA:
Use your control/monitoring equipment (connected to the analyzer) to report the
actual output value.
Use the soft keys to increase or decrease the actual output value until your control /
monitoring equipment indicates 20 mA output.
When the mA output has been correctly calibrated, press the soft key, the mA output
service screen will then be displayed again.
Menu Service mA Output mA Output 1 : 1 XXX mA Output 1 : 1 XXX
Calibrate mA Output Override mA Output mA Output
Data Log mA Input Calibrate 2
Alarms Relay Override 1 1
Status
Set Up
Measurements
Service
adjust
mA Output 1 : 1 XXX mA Output 1 : 1 XXX
Calibrate Calibrate
mA 20.000 mA
adjust
select
select
Menu Service mA Output mA Output 1 : 1 XXX mA Output 1 : 1 XXX
Calibrate mA Output Overide mA Output mA Output
Data Log mA Input Calibrate 2
Alarms Relay Override 1 1 select
Status
Set Up
Measurements
Service
mA Output 1 : 1 XXX mA Output 1 : 1 XXX
Override Value Override Value
2.000 mA 2.000 mA edit value
mA Output 1 : 1 XXX mA Output 1 : 1 XXX
Override Override
Yes
No No select