Servomex 07931001B, Руководство оператора

Страница: 137 / 221

07931001B revision 6 © Servomex Group Limited. 2020
123
Note: Other wrenches required as appropriate for M16 and M20 cable glands, adaptors
and/or conduit being fitted.
Items to remove before installation
The Transmitter Unit of the Laser 3 Plus is shipped with all ports blocked. In order
for safe operation of the unit, the fitting on purge port 3 (back of the unit) should
have the blanking nut removed and replaced with the nut and ferrule accessory
supplied in a separate bag. The blank nut must be retained in the event of transport
to another location.
Ensure that Purge Port 3 of the Transmitter Unit, ‘Enclosure Out’, is free
to vent to atmosphere before operation of the instrument.
The transmitter unit is also shipped with a small bag of silica gel inside the enclosure
unit. Ensure that this bag of gel is removed before operating the instrument. If the
bag has ruptured during transit, ensure that any particles of silica gel are removed
from the instrument before operation.
Remove Silica Gel sachet before attempting to operate the instrument.
The Gland plate on the transmitter unit is shipped with all gland entries sealed with a
stopping plug. Ensure that any plugs that are removed during the course of wiring
the instrument, are retained in the event that the instrument needs to be transported
to another location.
Ensure that any parts which are removed for the purposes of
installation are retained. They must be refitted in the event the
instrument is transported to another location.